UREC- ESD Touchpad with indicator and alarm

Description

ESD Touchpad with indicator- with indicator and alarm

ESD Touch Pads: ESD touch pads are used to dissipate or neutralize electrostatic charges on the human body. They are installed at the entrance of static-sensitive areas and are connected to an earth pit. Personnel touch the pad to discharge accumulated static charges.

Operating Instructions: When using ESD touch pads, personnel should place their hands on the pad to drain their body’s static electricity.

1. Place your hand on the ESD TOUCH PAD.
2. The green “LED” will goes “ON”, and also audio Signal (BUZZER) “ON”.
3. After discharging your body static electricity,automatically green LED and audio signal will goes “OFF”
4. Remove your hand, now you can enter into your valuable work place.

Specification For The ESD TOUCH PAD :
Mechanical:
(a). Length : 300 mm. (b). Width : 240 mm.
(c).Height: 25mm.
(d).visible indicator: yes(5mm GREEN LED).
Electrical:
(a). Power Source: Type ‘9 volts’ Battery Cell.
(b). Battery (Low): Indicated by low Intensity in LEDS.
(c). Battery Replacement: To be carried out in safe area only by removing the end screws.
(d). Cable: 2.0 meters 1 mm square multi stand cable. (e).Battery backup:9 months to 1year
(f).Operating temperature:-40˚c to 125˚c. (g).dissipation time:5 sec. (h).Accuracy:±10%.