Description
This meter is a non-contact, hand held, static monitoring and locating instrument. It utilises a precision LCD
display to indicate the magnitude and polarity of the electrostatic charge.
The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in
critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for
Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.
OPERATION:
1. Slide open battery cover, install a 9V battery inside and close cover.
2. Switch ON the instrument, and Press the ZERO button to reset instrument.
3. For accurate readings, the meter should be grounded by means of the grounding cord supplied.
4. Now from about 30cms distance, move instrument towards the surface or object and stop when the
distance between front of the meter (i.e. sensor) and the object is 5cms.
5. The reading on the display is the electrostatic potential on the object or surface.
6. Maximum range is 20KV at 5cms. However, measurement range can be doubled, if reading is taken at 9cms.
i.e. At 9cms, reading on display x 2 = actual Voltage
SPECIFICATIONS
Indicating range : + 20 KV at 5 cms from object.
Resolution : LSB 10 V
Display : 3.5 Digit LCD display.
Accuracy : 10% of reading for ambient RH < 65%
Test Actuation : Push On – Push Off Switch
Power Supply : 9 V battery.
Low Battery : Indication on Display at < 7.5V
Dimensions in mm :125 x 75 x 29
Weight : 135 gms.
Calibration : Recommended once every 12 months.
Warranty : One year.
Accessories : Carrying case
Reviews
There are no reviews yet.